| Course | |||||
|---|---|---|---|---|---|
 | 20 - Control System / 20.04 - Drive System A backtrace records events and errors in the drive system and can be helpful in troubleshooting the drive system. The analysis can only be done by Soudronic with the help of a special program. This training shows how to copy the data from the... | ||||
 | 20 - Control System / 20.04 - Drive System This course describes the process to update the ACOPOS software. You will learn how to: download the software from the server, create an ACOPOS flash and update the machine.
B&R / drive system / ACOPOSmulti / Axis Manager X20 / POWERLINK / servo... | ||||
 | CHF 999.00 20 - Control System / 20.04 - Drive System The function of the resolver can be easily tested by using the LEDs on the resolver card. This course shows you step by step how to do this.
B&R / ACOPOSmulti / Axis Manager X20 / POWERLINK / servo amplifier / E0500 / I0028D / I0055D / I0220S | ||||
 | CHF 999.00 20 - Control System / 20.04 - Drive System A replacement is necessary if the card is defective or must be used for a test in the event of an error message from the machine.
B&R / ACOPOSmulti / Axis Manager X20 / POWERLINK / servo amplifier / E0500 / I0028D / I0055D / I0220S | ||||
 | CHF 999.00 20 - Control System / 20.04 - Drive System Servo amplifiers can be interchanged for troubleshooting. If a defective servo amplifier is identified, it must be replaced by a new one. A few points must be considered for the exchange. This training shows the exact procedure.
B&R /... | ||||
 | CHF 999.00 20 - Control System / 20.02 - CAN bus This course explains the basics of the CAN bus as well as the special features of the Soudronic machines. | ||||
 | 20 - Control System / 20.02 - CAN bus A flawlessly functioning CAN bus is essential for the machine to work. This training course shows you how to identify problems with the CAN bus, how to assess the CAN bus and how to resolve common errors.
Troubleshooting / UNICONTROL error /... | ||||
 | CHF 999.00 05 - CAN-O-MAT The beading depth can be infinitely adjusted by readjusting the inner tools. This training course explains how to adjust and then check the beading depth.
CAN-O-MAT / COM I / COM II / mechanical setup | ||||
 | CHF 999.00 05 - CAN-O-MAT The seam quality is dictated by a number of factors: these include the availability of perfect, specification-compliant bodies and ends, but also the exact and consistent configuration of the actual seaming tools. The spindle sleeve pressure can... | ||||
 | CHF 999.00 05 - CAN-O-MAT For each seaming roller, you have to set the lateral gap and the height relative to the seaming chuck precisely. These settings should be identical for each seaming station spindle sleeve to ensure that the same seaming results are achieved for... |
